Product: MAX6 series - F - WATERCOOLED - Submersible electric pump for clean water - Diameter 140mm - 400Vac three-phase - MAX 6 SUBMERSIBLE PUMPS WITH 140 DIAM.
click to zoom the image
|
MAX 6/F Water Cooled three-phase 3x400Vac
Suitable for pumping liquids with a max content of solid of: 250 g/cu.m.
Ecological - Water cooled motor
Pump Nomenclature: MAX 6 Water Cooled F series Use: raising clear water Power: 400 Vac three-phase
Maximum capacity: 650 liters per minute
Maximum height: 428 meters (MAX6 / F28 + 6C 35.00HP)
Power used (three-phase): from 3,00kW - 4,00Hp to 26,00kW - 35kW
Max quantity of sand: 250 grams per cubic meter
Applications: Wells (minimum internal diameter 145mm, tanks)
Protection class: IP68
Supplied electric cable: 2.5 meters
Advantages of the MAX 6 series coupled to the 6C X-Power submersible motor:
|
|
Power |
Volts
|
Flow rate |
Shipping |
VAT excluded
|
Order now!
QTY
|
||||||||
---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
kW |
Hp |
Q=l/min' |
0 |
250 |
300 |
400 |
450 |
500 |
600 |
|||||
Q=m3/h |
0 |
15 |
18 |
24 |
127 |
19,5 |
21 |
|||||||
Q=lt/sec. | 0 | 4,2 | 5 | 6,7 | 7,5 | 5,42 | 5,83 | |||||||
MAX6/F03-4 + 6C WATERCOOLED |
3,00 |
4,00 |
3x400 |
H=ml |
46 |
38 |
35 |
29 |
25 |
21 |
10 |
Sconto 20 % |
|
|
MAX6/F04 + 6C 5,5HP WATERCOOLED |
4,00 |
5,50 |
3x400 |
H=ml |
61 |
50 |
47 |
39 |
33 |
27 |
13 |
Sconto 20 % |
|
|
MAX6/F06 + 6C 7,5HP WATERCOOLED |
5,50 |
7,50 |
3x400 |
H=ml |
92 |
75 |
70 |
58 |
50 |
41 |
20 |
Sconto 20 % |
|
|
MAX6/F08 + 6C 10HP WATERCOOLED |
7,50 |
10,00 |
3x400 |
H=ml |
122 |
100 |
94 |
77 |
67 |
55 |
27 |
Sconto 20 % |
|
|
MAX6/F10 + 6C 12,5HP WATERCOOLED |
9,20 |
12,50 |
3x400 |
H=ml |
153 |
125 |
117 |
97 |
84 |
69 |
34 |
Sconto 20 % |
|
|
MAX6/F12 + 6C 15HP WATERCOOLED |
11,00 |
15,00 |
3x400 |
H=ml |
184 |
150 |
141 |
116 |
100 |
82 |
40 |
Sconto 20 % |
|
|
MAX6/F14 + 6C 17,5HP WATERCOOLED |
13,00 |
17,50 |
3x400 |
H=ml |
214 |
175 |
164 |
135 |
117 |
96 |
47 |
Sconto 20 % |
|
|
MAX6/F16 + 6C 20HP WATERCOOLED |
15,00 |
20,00 |
3x400 |
H=ml |
245 |
200 |
187 |
154 |
134 |
110 |
54 |
Sconto 20 % |
|
|
MAX6/F20 + 6C 25HP WATERCOOLED |
18,50 |
25,00 |
3x400 |
H=ml |
306 |
251 |
234 |
193 |
167 |
137 |
67 |
Sconto 20 % |
|
|
MAX6/F24 + 6C 30HP WATERCOOLED |
25,00 |
30,00 |
3x400 |
H=ml |
367 |
301 |
281 |
232 |
200 |
164 |
81 |
Sconto 20 % |
|
|
MAX6/F28 + 6C 35HP WATERCOOLED |
26,00 |
35,00 |
3x400 |
H=ml |
428 |
351 |
328 |
270 |
234 |
192 |
94 |
Sconto 20 % |
|
X-POWER MAX6 SUBMERSIBLE PUMP WITH 6C MOTOR
DESCRIPTION
The "X-Power Water Pumps" submersible pumps for 6 "wells are reliable and easy to assemble. The MAX 6 submersible pumps (diam.140 mm) are very appreciated by the installers. High performance, special design, quality, assistance, guarantee are the main factors achieved by the X-Power brand. Made in Italy, the MAX6 pump has a non-return valve resistant to the 40 Bar of the low-prevalence versions, to the 100 Bar of the high-prevalence versions. The robust check valve is directly integrated into the head support, and it is easy to disassemble.
The Max 6 line incorporates seven series of submersible pumps with capacities ranging from 350 liters per minute to 1100 liters per minute.
The delivery is 3" female thread. This pump can work in continuous service (H24) and/or in a horizontal position, but it does not allow dry running.
To ensure correct operation, it is recommended to perform the first start-up with a reduced flow rate and to always leave the pump submerged with a minimum of one meter of water.
All MAX 6 pumps have the serial code. They are equipped with an EASY-CHECK mounting system (with filter integrated into the pump). The assembly between the suction and delivery supports with the outer jacket is made using the threading with short pitch system. This greatly increases the resistance to water hammer, and therefore the hydraulic seal and reliability in deep wells. The design and the sand guards prevent the valve from locking, ensuring better operation.
TECHNICAL FEATURES
- Max quantity of sand: 250 grams per cubic meter
- Rotor battery fully floating on the pump shaft
- No axial load on the motor
- ''Easy-check'' assembly
- Maximum capacity: 66 cubic meters/hour (MAX 6 L series)
- Head: up to 842 m (MAX 6 series B series)
- Suction and delivery supports: stainless steel investment casting
- Non-return valve: high resistance in calibrated stainless steel
- Pump shaft: with high mechanical and corrosion resistance
- Coupling: rigid, tempered, easily removable
- The external electric cable of the whole series is protected by a shaped stainless steel cover
- Overall dimensions: 145mm
- Inverter/resistant motor
- Max start/h: 30
ELECTRICAL CONTROL PANEL
A well-calibrated electrical panel is a fundamental choice for a right start up and a perfect management of submerged pumps. Combining the appropriate electrical panel for each submersible pump ensures greater durability over time.