Click the images to see the main characteristics

 

SMARTPUMP AUTOMATIC WATER PUMP

Automatic, self-priming, single-phase pump to increase water pressure

SMARTPUMP is a functional and compact product. It can be installed in the most confined spaces without additional fittings.

 
This selfpriming pump can be used for a wide variety of applications:
It is suitable to increase water pressure in domestic systems, but it is also perfect for small irrigation system and gardening applications.

The pump can be mounted until the fourth floor. At this height (fourth floor), the restart of the smartpump (smartpump750) can be adjusted to 3.5 bar.



WHY SMARTPUMP?

SMARTPUMP is a professional automatic water pump, ideal for Do-It-Your-Self installations, that solves home and irrigation water pressure problems.
 

Thanks to the compact design, this kind of pumps can be easily installed in very small spaces.

In the inlet pipe, SMARTPUMP has a filter that prevent eventual damage of the pump.

In the case of dry running, the pump sets automatically the block-protection. It will starts again when the water comes back; this action takes place, thanks to the flow switch that detects even a minimal flow.

SMARTPUMP is a monolithic pump unit, compact and ready to use.
The double outlets allows the mounting with an horizontal or an angular suction line, without the use of any other connections. 

This pump is also equipped with a buffer tank, that decreases the frequent starts, produced by small water extractions and/or small losses of water. 

The relay (that opens and closes the power supply contacts) is guaranteed for 500,000 Start/Stop.

 

Unlike the traditional autoclaves, SMARTPUMP is ready to use.
It is designed to be marketed in the do-it-yourself market:
you can install SMARTPUMP even with a minimal knowledge of plumbing.

While maintaining the traditional constructive structure of a peripheral electric pump, SMARTPUMP is able to guarantee high pressures in relation of the power used. 
 

It is suitable for the sale in hardware stores and plumbing Shops.

MAIN FEATURES

Automatic Operation Start: When you open the tap - Stop: when you close the tap
Self-priming Pump in order to self-prime, the housing pump must always be full of water
Dry-running protection
Delayed Start delay starting after the first installation, or after a sudden blackout
Anti-Galling Function the pump makes an auto-test after 3 days of non-use
Greater silence than pumps with peripheral impeller
Expansion tank to decrease the sudden starts
Compact product
Two mounting options horizontal, or at 90°
Adjustable starting pressure
Stainless steel filter in the suction pipe
Each component is easily replaceable
Liquid temperature range 10 °C - 90 °C 

WHO CAN BUY SMARTPUMP?

SMARTPUMP is particularly suitable for professional sellers, such as wholesalers, hardware-, and/or thermal-hydraulic salers.

It is easily maintainable; It is possible to request both the main parts (pressure, flow-swich, expansion-jar, electronic card) or the single-components of the pump.

To support the growth of our Brand we are currently searching for valid partners.









 

Smartpump is available in two models:

Smartpump 500 (0,50HP) and Smartpump 750 (0,75HP)