click to zoom the image
|
SMARTPUMP 750
Self-Priming, single-phase, automatic, electric pump to increase water pressure Pump Nomenclature: SMARTPUMP 750 Use: to increase water pressure Number of living units: one (1) Location: from ground floor to the tird floor Power: 230 Vac / 0.37 kW (0.75 Hp) Start setting: from 0.5 to 2.5 bar Application: Well and tank Installation: Horizontal or 90° Inlet
Protection class: IPX4
|
|
|
Power |
Volts |
Flow Rate |
IMMEDIATE |
VAT |
QTY |
|||||
|---|---|---|---|---|---|---|---|---|---|---|---|
|
kW |
Hp |
Q=l/min' |
5 |
35 |
48 |
58 |
|||||
|
Q=mc/h |
0,3 |
2,1 |
2,9 |
3,5 |
|||||||
|
SMARTPUMP 750 XP3098 |
0,55 |
0,75 |
1x230 |
H=ml |
41 |
22 |
20 |
5 |
SHIPMENT |
Sconto 20 % |
|
Confidential negotiations for orders over 500 pieces
Cost analysis of SMART PUMP750
Eur 100,00: for an electric self-priming pump of 0,75 HP, for hot and cold water
Eur 1.50: for 1 meter neoprene cable
Eur 1,50: for 1 Schuko wall plug
Eur 2.50: for a suction filter
Eur 12,00: for an expansion vessel
Eur 30,00: for a flow switch
Eur 28.00: for an adjustable press control
Eur 25,00: for an anti-lock system
Eur 1.50: for the savings when buying an hydraulic elbow adapter
Eur 3.90: for the savings when buying a brass screw connection
Eur 2.00: for the savings when buying a butterfly screw
Tot 207,90 excl. Labor costs
This innovative domestic pump is high-end engineering product that guarantees the best reliability. It maintains the traditional constructive structure of a peripheral electric pump, but it guarantees high pressures.
There are two models available:
1)SMARTPUMP 500 that takes 0,50HP;
2)SMARTPUMP 750 that takes 0.75 HP.
Both are automatic self-priming pumps powered at 230Vac, and both are designed to increase the domestic water pressure (of hot or cold water), with temperatures between 10°C and 90 °C.
MAIN FEATURES
Automatic Operation Start: When you open the tap - Stop: when you close the tap
Self-priming Pump in order to self-prime, the housing pump must always be full of water
Dry-running protection
Delayed Start delay starting after the first installation, or after a sudden blackout
Anti-Galling Function the pump makes an auto-test after 3 days of non-use
Greater silence than pumps with peripheral impeller
Expansion tank to decrease the sudden starts
Compact product
Two mounting options horizontal, or at 90°
Adjustable starting pressure
Stainless steel filter in the suction pipe
Each component is easily replaceable
Liquid temperature range 10 °C - 90 °C
AUTOMATIC
Before starting:
Unscrew the butterfly screw located on the top of the pump, and fill SMARTPUMP with clean water.
SELF-PRIMING
SMARTPUMP is a self-priming pump. But, in order to self-prime, the housing pump must always be full of water.
The table shows, the circuit filling time, if the pump draws from a negative suction tube.
PROTECTION FROM DRY RUNNING
The pump sets automatically the block-protection in case of dry run situations.
FLOW SWITCH FUNCTION
SMARTPUMP starts again automatically when the water comes back; this takes place, thanks to the flow switch that detects even a minimal flow.
REDUCING FREQUENT LY STARTUPS
SMARTPUMP is equipped with a buffer tank of 600 grams, which avoids the frequent and/or sudden starts of the pump (due to small losses or withdrawals of water).
IMPROVED COOLING
The special shape of the patented fan-cooling-cover, ensures a better engine cooling.
COMPACT PRODUCT
SMARTPUMP is a monolithic pump unit, compact and ready to use.
The pump has a double outlet. It can be installed horizontally or at 90°, without the use of any connecting nipple.
NOISE OF SMARTPUMP
SMARTPUMP reduces the noise level down to 10% (compared to standard peripheral pumps), thanks to the some technical-constructive measures:
1) the ENAMEL coating of the pump housing;
2) the use of a plastic base, placed under the pump;
3) the fixing with stainless steel, of the brass impeller on the motor axis.
HEIGHTS OF SMARTPUMP
The quota (in other words, the difference between the pump and the farthest point) is a dimensional problem for many presscontrols on the market.
SMARTPUMP is able to cover up to 25 meters, with only two models, thanks to the electromechanical pressure switch.
SMARTPUMP 500 can reach up to 15 meters; and SMARTPUMP 750 can reach up to 25 meters.
SMARTPUMP AND WATER LEAKS
SMARTPUMP is equipped with a buffer tank from 600 grams, which decreases the frequent starts, produced by small water extractions and/or small losses. The buffer tank extends the life of the product and ensures a reduced power consumption.
The relay (that opens and closes the power supply contacts) is guaranteed to 390.000 Start/Stop for SMARTPUMP 500, and 490.000 Start/Stop for SMARTPUMP 750.
INSTALLATION OF SMARTPUMP
The traditional autoclaves, or/and the normal water pressure pumps, have a presscontrol and they are characterized by the indispensable installation of preparatory components. Instead, SMARTPUMP is compact and ready to use.
SMARTPUMP is equipped with 60 cm of wire and Schuko plug. It is ready to be connected to the power grid and to the water supply network.
