click to zoom the image
|
Automatic, Self-priming, Single-phase, Water Pump to Increase Water Pressure
Pump Nomenclature: MINIPUMP 120
|
|
Power |
Volts |
Flow Rate |
Shipping |
VAT |
Order now! |
|||||
---|---|---|---|---|---|---|---|---|---|---|---|
kW |
Hp |
Q=l/min' |
5 |
25 |
40 |
60 |
|||||
Q=mc/h |
0,3 |
1,5 |
2,4 |
3,6 |
|||||||
MINIPUMP 120 XP4200 |
0,15 |
0,20 |
1x230 |
H=ml |
12 |
10 |
8 |
6 |
Sconto 20 % |
|
Confidential negotiations for orders over 500 pieces
MINI-PUMP 120 is an automatic, single-phase pump with an "Autostart-Stop". It has been designed to increase the water pressure in domestic water systems.
Thanks to the hydraulic conformation, you can disassemble the tube, and install the MINI-PUMP in very tight spaces.
This self-priming pump has a flow switch that allows the ON when you open the tap and the OFF when you close it.
It can pump clean liquid, free from solids, with temperature between +2 ° C and +90 ° C.
MINI-PUMP MAIN FEATURES
Automatic Operation Start: When you open the tap - Stop: when you close the tap
Three (3) different speeds reduced speed, average speed, top speed
Stop in case of a block If the pump will block, it will stop immediately
Re-start when the water returns, the pump starts again
Switch with three (3) positions O: OFF; I: Automatic; II: Manual
Compact product
Direct mounting on the tube thanks to the horizontal inlet and outlet
Stiller than the pumps of the same category
Each component is easily replaceable
Liquid temperature range from 2°C to 90 °C
HEIGHT OF THE MINI-PUMP 120
INSTALLATION
You can install MINI-PUMP both inside and outside the house; provided that it is a dry site, protected from bad weather and low temperatures.
Avoid installation in humid sites where condensation may damage the pump.
GENERAL HYDRAULIC DATA OF MINI-PUMP 120
Speed I:
140 P(W)
210 P(W)
245 P(W)
DIMENSIONS